MF 375 Tractor Price in Pakistan | 2025 Models
MF 375 Tractor is the third most popular model of Millat tractor after , MF 350, and MF260. New Holland tractor 640 is the closest competitor to MF 375. The Massey 375 tractor has 75 Horse Power. It is popular in sugarcane areas and has a lower demand than other models.
MF 375 Tractor Price in Pakistan 2024:
| Model | New Price with GST 14% |
| MF 375-2WD | Rs. 3,692,460 |
| MF 375-4WD | Rs. 4,963,560 |
Prominent Features of Millat 375 Tractor:
- New Headlights with Elegant Indicators and Highly Effective Headlights
- Hydraulically actuated Efficient Multi-Disc Brake Systems.
- Mid Mounted Bigger Balancing for reduced Engine Vibrations and Smooth Running.
- Improved Harness set with Heat Shrinkage sleeves & Waterproof Couplers.
- Robust Straddle Rear axle with Epicyclical Reduction Unit.
- Low noise engine that is durable and highly efficient.
- New aerodynamic look with Stylish Wrapper & Gill.
- Oil Cooler for Effective Cooling
- Heavy Duty Front Axle & Support.
- New Spring Suspension Deluxe seat.
- Hydrostatic Power Steering
- Smart Steering Wheel to Reduce Steering Effort.
Specifications of MF 375 Tractor:
PERFORMANCE
- Engine power at 2,200 revs: 75 (B.S.) hp*
- Torque at 1,400 rpm: 290 Nm
- PTO power at rated motor speed: 69.5 hp**
- PTO power at 540 Rpm 63.0 HP
- Engine certified to BS.AU 141a (1971) Manufacturer’s Estimate
ENGINE
- Type: Diesel / 4.41
- No. No.
- Injection: Direct
- Bore: 101 mm
- Stroke: 127mm
- Capacity (litres: 4.1
- Aspiration: Natural
- Compression ratio: 15.3 to 1
- Thermostart
- Hand and foot throttle control
- Cooling: Water
- Air Cleaner Type : Oil Bath
- Air Pre-Cleaner: Over bonnet
- Fuel filter: Dual, High Capacity
- Exhaust: Vertical muffler under bonnet
- Oil Cooler: Water-cooled
POWER TAKE OFF (PTO)
- Type: Live
- Engine speed at 540 PTO : 1,789 rev/min
- Shaft diameter: 35 mm
- No. No.
HYDRAULICS
- Functions: Draft control, Position control, Response Control, Constant pumping
- Pump Type: Ferguson Pump Reciprocating Pump
- Oil Flow: 16.7 l/ min
- Pressure: 21.2 MPa when operating at normal temperature
- Lifting capacity with lower links horizontal : 2,145 kg
- Lower links: Cat. I & II interchangeable ball
WEIGHTS AND DIMENSIONS
(With 7.50-16 front & 16.9/ 14-30 rear wheel and with full fuel, oil and water)
- Gross Weight: 2,295 kg
Dimensions
- Wheel base: 2,170 mm
- Overall length: 3,670 mm
- Width (min.): 1,970 mm
Height
- Over Exhaust: 2,485 mm
- Over Steering: 1,730 mm
Turning circle
- With brakes: 7,260 mm
- Without brakes: 8,095 mm
- Ground clearance: 501 mm (Under gear box)
ELECTRICS
- Voltage: 12V, Negative Earth
- Battery: 118 Ah
- Starter Motor: 2.8 kW
- Alternator: 45 Amp
CLUTCH
- Type: Dual clutch
- Diameter: 305×254 mm
- Lining material: Cerametallic
TRANSMISSION
- Type: Sliding spur
- Number of gears 8 forward, 2 reverse Road speed at 2,200 engine rpm with 16.9/14-30 rear tyres.
- Gear Speed (km/hr)
- Forward 1: (first low) 2.65
- Forward 2: 3.89
- Forward 3: 5.32
- Forward 4: 7.14
- Forward 5: (first high) 10.62
STEERING
Type: Hydrostatic
FRONT AXLE
- Type: Heavy Duty Box Section, Adjustable
REAR AXLE AND BRAKES
- Axle Type: Straddle with epicyclic reduction unit
- Brake Type: Oil immersed, multi-disc
- Brake Pedal: Pendant
- Braking Area: 1,774 sq.cm
- Brakes Actuation: Hydraulic
- Parking Brake: Hand lever operated
INSTRUMENTATION
- Gauges: Tachometer, Hour meter, Fuel level, Battery condition & Water temperature
- Warning lights: Direction indicators, Electric charge, Headlight main beam, Low engine oil pressure, Brake lights & Auxiliary
TYRES
- Front: 7.50-16 (6PR)
- Rear: 16.9/14-30 (6 PR)
CAPACITIES (Liters)
- Fuel Tank: 108.0 2
- Engine sump: 7.5
- Cooling system: 15.2
- Hydraulic system: 36.0
- Hydrostatic steering reservoir: 2.0
- Oil bath air – cleaner: 0.7
- Brake Oil: 0.25
STANDARD EQUIPMENT
Weight frame without weights. Standard toolbox with set of tools. Top link, top link end Cat-I & II balls. Check Chains. Stabilizer chains. Spring suspension seat. Operator’s manual.
OPTIONAL EQUIPMENT
- Front end weights, swinging drawbar, sun canopy, pintle hook and hole drawbar.
Review of MF 375 Tractor:
Millat, and Al Ghazi Tractors were both in a fierce competition at the beginning of 2018. The MF 375 tractor is mainly used for tractor trolleys or haulage purposes. MF385 has the same engine. The only difference is in tyre sizes and other small things. The market share of , NH 640, and MF375 tractor is about 50-50 percent. NH640 has a slightly higher MS than this tractor.
In Pakistan, 75HP tractor sales are less than 85HP and even 65HP. In Pakistan, the most popular tractor models are NH480 (NH Ghazi), MF260, and MF385. This tractor consumes a little more fuel than NH640. If you are looking to buy it as a ploughing tractor, then NH640 is the better choice. If you are looking to buy a MF 375 tractor, I would recommend the 85HP MF385 tractor or NH Dabung tractor from New Holland. You will get 10HP more for a little extra money.
